Simplicity Symmetry Belt B014-0714 | SewandVac.com

Free National Shipping on Any Order $299+

Your cart

Your cart is empty

Simplicity Symmetry Belt B014-0714 for Symmetry, SHD-1T and Riccar Vibrance

SKU: B014-0714
Regular price $0.00 $4.95
Unit price
per 

This genuine flat vacuum belt, part B014-0714, is the standard belt for most Simplicity Symmetry and 6000-series uprights, the Simplicity Heavy Duty SHD-1T, and most Riccar Vibrance and 8000-series uprights. You get one belt.

Fits these Simplicity and Riccar vacuums

  • Simplicity Heavy Duty SHD-1T
  • Simplicity Symmetry S20 series: S20E, S20S, S20D and S20SC
  • Simplicity Symmetry SYMD, SYMC, SYMCL, SYMCLNT, SYME, SYMENT, SYMS and SYMST
  • Simplicity Symmetry patriotic models SYMUSA.SU, 6770, 6870 and 6970
  • Riccar Vibrance R20E, R20S, R20D and R20SC, including the R20 patriotic models
  • Riccar Vibrance VIBD, VIBDL, VIBC, VIBCL, VIBCNT, VIBE, VIBENT, VIBS and VIBST
  • Riccar 8000-series 8955, 8925, 8625, 8650, 8715, 8850, 8600 and 8750, all Riccar 4-series uprights and the R-series 2150

Not for belt-protection models. Symmetry Premium and Ultra Premium models with belt protection take the Symmetry Lifetime Belt, B014-1300. Vibrance Premium Plus and Commercial belt-protection models take the Poly-V belt B014-1400.

Not for the S20EZM. The Simplicity S20EZM Allergy Upright uses its own belt. Freedom lightweights take a different belt too, such as the Poly-V belt B014-1200.

How to tell. This belt is flat and smooth, not grooved. Your model number is on the rating plate. Send us your model and we'll confirm the fit before you order.

Why genuine belts matter

  • The right length. Simplicity and Riccar list this exact part for these models, so it drives the brushroll at the tension the vacuum was built for.
  • One part, two brands. Riccar sells the same belt as its Vibrance and 8000-series belt, and as a 2-pack (RS20-B2) that it states is the same as B014-0714.

Why buy from Imagine Sewing & Vacuum

  • Authorized Simplicity and Riccar dealer. Every belt is genuine Simplicity and Riccar stock.
  • Vacuum specialists since 1922. Our factory-trained technicians service Simplicity and Riccar vacuums, so we know which belt each model needs.
  • Free shipping on orders over $299.

What's in the box

  • 1 flat vacuum belt, part B014-0714

Simplicity notes that packaging may vary.

When to replace it

Simplicity's SHD-1T manual says to check the belt regularly and replace it if it's stretched, cracked or slipping. The manual's steps, with the vacuum unplugged:

  • Press the handle release pedal twice to lower the handle, and turn the vacuum over.
  • Remove the two screws and the bottom plate.
  • Remove the belt guard, pull the agitator (brushroll) straight out and take off the old belt.
  • Loop the new belt over the motor pulley and the end of the agitator, then stretch it over the agitator as you set it back in the nozzle.
  • Refit the belt guard. Hook the front of the bottom plate under the two ribs on the nozzle, press it into place and replace the screws.

Expert tip

"Change the belt before it snaps. A stretched belt still turns the brushroll, but it slips on carpet and you lose deep cleaning without noticing. When you swap it, pull the hair and thread off the brushroll ends too. Keep a spare in the closet, because these uprights go through belts."

Greg, Owner, Imagine Sewing & Vacuum

Specifications

Part number B014-0714 (Simplicity and Riccar)
Type Flat brushroll belt
Quantity 1 belt
Fits Simplicity Heavy Duty SHD-1T and most Symmetry and 6000-series uprights
Fits Riccar Most Vibrance and 8000-series uprights, 4-series and R-series 2150
Same belt as Simplicity SB6 belt; Riccar RS20-B2 (2-pack)
Doesn't fit Belt-protection models, the S20EZM or Freedom lightweights

Frequently asked questions

Does this belt fit the Simplicity SHD-1T?

Yes. The SHD-1T manual calls for Simplicity's SB6 belt (sold as the SB6-2 2-pack), and Simplicity sells that standard Symmetry and 6000-series belt individually as part B014-0714.

Will it fit my Symmetry with belt protection?

No. Symmetry models with belt protection use the grooved Symmetry Lifetime Belt, B014-1300.

Does it fit Riccar Vibrance uprights?

Yes, standard Vibrance models. Riccar sells this part as its Vibrance and 8000-series belt. Vibrance belt-protection models take B014-1400 instead.

How often should I replace it?

There's no fixed interval. Check it whenever you change the bag, and replace it if it's stretched, cracked or slipping.

Free Shipping On Orders Over $299

Have questions? Contact us

    • The Simplicity Symmetry Belt B014-0714 for Symmetry, SHD-1T and Riccar Vibrance Package.

    The Simplicity Symmetry Belt B014-0714 for Symmetry, SHD-1T and Riccar Vibrance Package.