The genuine Miele HX-FSF is the replacement fine dust filter for the original Triflex HX1 cordless stick vacuum. Its pleated material catches the ultrafine dust that gets past the dust container, and Miele recommends changing it every three years. One filter comes in the box.
Fits these Miele vacuums
- Miele Triflex HX1 cordless stick vacuums, except the HX1 Facelift
Not for the HX1 Facelift, HX2 or HX3. Those models take the HX-FSF-2 fine dust filter, including the Triflex HX1 Facelift, Triflex HX2 and Triflex HX3. The names are close, so check before you order.
How to tell them apart: the HX-FSF has an all-black top cap with a "Pull" tab. The HX-FSF-2 has a yellow band under its cap. Compare it with the filter in your vacuum, or send us your model and we'll confirm the fit.
What it does
-
Catches fine dust. Miele says the pleated material filters even the smallest dust particles from the air.
-
Cleans by tapping. Knock the dust off over a trash can.
-
Keeps performance up. Miele says to change it every three years to maintain performance.
Why buy from Imagine Sewing & Vacuum
-
Authorized Miele dealer. Every filter is genuine Miele stock.
-
Vacuum specialists since 1922. Our factory-trained technicians service Miele vacuums, so we know which filter each model needs.
- Free shipping on orders over $299.
What's in the box
- 1 Miele HX-FSF Triflex fine dust filter
When to replace it
-
Every three years: Miele's recommended interval to maintain performance.
-
Sooner if it's damaged: replace a filter with torn or crushed pleats right away, because it can let fine dust through.
-
Between changes: open the dust container lid, lift the filter out by its "Pull" tab and tap it clean over the trash. The video on this page shows each step on an HX1.
Expert tip
"Tap the filter clean every time you empty the bin, not just when suction drops. A dust-caked filter costs you suction. When you fit a new one, write the date on a piece of tape on the wall bracket so you know when three years are up."
Greg, Owner, Imagine Sewing & Vacuum
Specifications
| Miele part number |
11385020 (model HX-FSF) |
| Type |
Triflex fine dust filter, pleated |
| Quantity |
1 filter |
| Fits |
Triflex HX1 cordless stick vacuums, except the HX1 Facelift |
| Cleaning |
Tap clean |
| Replacement interval |
Every 3 years |
| GTIN / EAN |
4002516262756 |
Frequently asked questions
Which Triflex models does the HX-FSF fit?
Only the original Triflex HX1. Miele lists it for HX1 cordless stick vacuums except the Facelift.
I have a Triflex HX2 or HX3. Which filter do I need?
The HX-FSF-2. It also fits the HX1 Facelift.
How often should I clean it?
Tap it clean whenever suction drops or the filter looks dusty. Replace it every three years.
Is this a genuine Miele filter?
Yes. It's Miele part 11385020, the same HX-FSF filter Miele USA sells for the HX1.
