The genuine Baby Lock 12 Foot Kit (BL-FEET12) adds twelve specialty presser feet to Baby Lock sewing machines in accessory groups A, B, D, G and H, including the Jazz II, Allegro, Brilliant, Soprano and Solaris. The feet cover gathering, cording, piping, pintucks, invisible zippers, narrow hems and 1/4" quilt seams, and they come in a see-through storage case.
Fits these Baby Lock machines
Baby Lock lists these compatible machines:
-
Jazz II, Jazz and Allegro
-
Brilliant, Jubilant and Zest
-
Soprano, Ballad, Chorus, Lyric and Presto II
-
Aurora, Bloom, Vesta and Flare
- Aerial, Altair, Altair 2, Radiance and Radiance Limited Edition
- Solaris, Solaris 2 and Solaris Vision
- Destiny, Destiny II, Ellisimo, Ellisimo Gold and Ellisimo Gold 2
- Accord, Aria, Aventura, Aventura II, Crescendo, Flourish, Journey, Meridian, Meridian 2, Pathfinder, Spirit, Unity and Verve
Not for Baby Lock sergers, coverstitch machines or multi-needle embroidery machines. These are sewing machine feet for Baby Lock's group A, B, D, G and H machines.
Not sure about your machine? Baby Lock sorts its sewing machines into accessory groups, and the kit's label reads "Fits Groups: A, B, D, G & H". If your model isn't listed above, such as the Joy or Zeal, send us the model number and we'll confirm the fit before you order.
What it does
-
Quilting: the 1/4" foot with guide gives an exact 1/4" seam for piecing, and the edge joining foot stitches in the ditch.
-
Garments: the invisible zipper foot, shirring/gathering foot and 1/8" hemmer foot, which rolls a 3 mm double hem on lightweight fabric.
-
Tricky fabrics: the roller foot feeds leather, vinyl, velvet, silk and suede, and the Teflon foot creates fringe, loops and fagoting.
-
Embellishment: the braiding foot, 7-hole cording foot, double cording/welting foot for 4-6 mm cord, pintuck foot and clear open toe foot for appliqué.
Why buy from Imagine Sewing & Vacuum
-
Authorized Baby Lock dealer. Every foot kit is genuine Baby Lock stock.
-
Sewing specialists since 1922. Our factory-trained technicians service Baby Lock machines, so we know which feet each model takes.
- Free shipping on orders over $299.
What's in the box
- Braiding foot
- Shirring/gathering foot
- Roller foot
- Cording foot, 7 holes
- Open toe foot
- 1/4" foot with guide
- Invisible zipper foot
- 1/8" hemmer foot
- Double cording/welting foot (4-6 mm)
- Edge joining foot
- Teflon foot
- Pintuck foot
- See-through storage case with a foam insert
Baby Lock's instruction sheet describes what each foot does. Sewing large quilts on a Jazz II or Allegro? Add the Jazz/Allegro Extension Table.
How to use it
- Attach each foot the same way as the standard foot that came with your machine, following your machine's instruction manual.
- Choose a stitch that suits the foot. The 1/4" foot, for example, is for a straight stitch with the needle in the center position.
- Sew a test on a scrap of your project fabric before you start.
Expert tip
"Every time you change to a specialty foot, turn the handwheel toward you by hand for one full stitch before you press the pedal. If the needle touches the foot, change the stitch or needle position first. That one habit saves a lot of broken needles."
Greg, Owner, Imagine Sewing & Vacuum
Specifications
| Baby Lock part number |
BL-FEET12 |
| Type |
Presser foot kit |
| Quantity |
12 feet plus storage case |
| Fits |
Baby Lock accessory groups A, B, D, G and H |
| Made in |
Taiwan |
| GTIN / UPC |
098612426073 |
Frequently asked questions
Will this kit fit my Jazz II or Allegro?
Yes. Baby Lock lists both the Jazz II and the Allegro as compatible machines.
Does it fit my Baby Lock serger?
No. The kit is for Baby Lock sewing machines in groups A, B, D, G and H. Sergers use their own feet.
My machine isn't on the list. Will it fit?
Baby Lock says the kit fits several machines beyond its list, but we only list the ones Baby Lock names. Send us your model number and we'll check it for you.
Which foot should I try first?
Quilters usually start with the 1/4" foot with guide. For garments, the invisible zipper foot and the 1/8" hemmer handle jobs the standard feet can't.
